Kb-electronics KBVF-23P Manual de usuario descargar pdf (Pagina 12)

• Electronic Inrush Current Limit (EICL™) – Eliminates harmful inrush AC line current

during startup. Models KBVF-21D, 22D contain ICL in lieu of EICL™.

• Short Circuit – Prevents drive failure if a short circuit occurs at the motor (phase-to-phase).

• Motor Filter – Reduces harmful voltage spikes to the motor.*

• Regeneration – Eliminates nuisance tripping due to bus overvoltage caused by rapid decel-

eration of high inertial loads.

• Undervoltage and Overvoltage – Shuts down the drive if the AC line input voltage goes

above or below the operating range.

• MOV Input Transient Suppression.

• Microcontroller Self Monitoring and Auto-Reboot.

*Only Models KBVF-21D, 22D, 13, 23, 23D, 14, 24, 24D, 26D Contain Motor Filter.

3.4 Trimpot Adjustments

• Minimum Speed (MIN) – Sets the minimum speed of the motor. See Section. 13.1, on page 39.

• Maximum Speed (MAX) – Sets the maximum speed of the motor. See Section. 13.2, on page 39.

• Acceleration (ACC) – Sets the amount of time for the motor to accelerate from zero speed

to full speed. See Section 13.3, on page 39.

• Deceleration (DEC/B) – Sets the amount of time for the motor to decelerate from full speed

to zero speed. See Section 13.4, on page 39.

• Slip Compensation (COMP) – Maintains set motor speed under varying loads. See Section

13.5, on page 40.

• Boost (DEC/B) – In 50 Hz mode, the trimpot automatically becomes Adjustable Boost,

which can be used to set the Volts/Hz Curve for 50 Hz motors to obtain maximum perform-

ance. In 50 Hz Mode, the deceleration time is automatically set to the same as the accelera-

tion time. See Section 13.6, on page 41.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 44 45

Sin comentarios

Kb-electronics KBVF-23P Manual de usuario Pagina 12